Application - Restaurant and Karaoke Lounge

For one singer and a master Page, set the internal Page Priority switch to P1. This allows the 'Announcer' to Page any area with the PR 2 remote.
For two singers, set the internal Page Priority switch to NO. This allows the two mics to mix.
Set both front panel Paging ZONE ASSIGNs to RMT.
On the PR 2 Remote: Set Page 2 Assign to Z1 (karaoke area only) Set Page 1 Assign to Z1 for karaoke -or- Z2 for dining area page -or- BOTH for all-page.
Zone 1 (karaoke) ZR 1 Remote: Set PROGRAM SELECT to L1; Adjust LEVEL as needed.
Set both front panel Zone RMT switches in to enable the Zone Remotes.
When a priority program (jukebox) is desired in dining area, set the Program PRIORITY ASSIGN switch to Zone 2 only.
Expand Outputs are still available (shown unused).
For karaoke applications, set the internal Z1 Page and Z2 Page switches to Pre-VCA. This allows the ZR 1 remote Level to control both Page and Program signal levels.

Program Source - Allows the use of up to 4 stereo sources (CP 52 & CP 64S) such as TV audio or a Music service.

Jukebox - This Input allows the Jukebox to automatically override the selected Program source.

Multichannel Amplifiers - The MA3 is 3 channels @ 40W 8 ohms The MA4 is 4 channels @100W 8 ohms

Page 2 - Can be used for a second page mic, or may be hooked to your phone system so you can page using your phone.

ZR 1 Zone Remote - Allows remote control of Program Selection and Zone Level.

PR 1 Page Remote - Allows remote control of Page Zone assignment

Zone 1 - Can be stereo or mono using the CP 52 or CP 64S.

Zone 2 - A second zone is available with the CP 64S.