This section shows you how to set up the XPanel executable’s communication settings so that the examples work. Have the IP address of your controller and the IP ID of the e-control handy before proceeding.
Open the Rane_HAL_TP.vtp project file in Vision Tools Pro-e. Right-click on the Rane_HAL_TP project in the Project View and select Properties. Select the Web tab in the Project Properties dialog. Enter your controller’s IP address for both Control System Info and e-control Gateway Info. Make sure that the IP ID of the e-control, not the IP ID of the XPanel, is selected. Recompile the XPanel to apply the new settings to the executable.