You are here: Reference for Processing Blocks and Controls > DSP Processing Blocks > Paging/Room Combine > Room Processor Paging Zone

Block Reference

Room Processor Paging Zone Block

The Room Processor Paging Zone block creates an output from the HAL Paging System. This block provides the audio processing and control required to duck program audio and insert page audio into the signal path.

note: In the Room Processor for a combined room, the Paging Zones from all the constituent base rooms are combined in the rooms' Room Processor Paging Zone block, meaning a page to any of the zones is sent to all the zones in the combined room.

This block is identical to the standalone Paging Zone block.

Room Processor Properties (Paging Zone Block)

To access this block, locate the relevant Room Combine Processor block on your Processing Map and open its properties. Click the Room Processors tab. Locate the relevant Room Processor block and open its properties. This Paging Zone block, which is a child block of the Room Processor block, appears. From here, you can open the Paging Zone block properties by double-clicking the block or hovering and clicking the properties icon that appears in the upper right of the block's title bar.

note: The signal path through the block is pre-wired and cannot be changed.

For more details, see the Room Processor Block and About Room Combine.