You are here: Reference for Processing Blocks and Controls > DSP Processing Blocks > Paging/Room Combine > Paging Station Level

Block Reference

Paging Station Level Block

The Paging Station Level block controls the volume of the page audio. The block includes a full-range level control from +12 dB to -88 dB. Provide end users with control over page audio volume by linking a DR1 or DR3 Level control to the Gain control of the Paging Station Level block. Limit the range of volume control by setting the Minimum and Maximum parameters. Selecting Off @ Min mutes the audio when the level control reaches the specified minimum value. A Mute switch in the Paging Station Level block allows muting the page audio without affecting the level control.

Paging Station Level Block

To access this block, locate a Paging Station block on your Processing Map and open its properties. This Level block, which is a child block of the Paging Station block, appears. From here, you can open the Level block properties by double-clicking the block or hovering and clicking the properties icon that appears in the upper right of the block's title bar.

note: The signal path through the block is pre-wired and cannot be changed.

For more details, see the Paging Station block.

See Also