You are here: Reference for Processing Blocks and Controls > DSP Processing Blocks > Paging/Room Combine > Zone Processor Paging Zone

Block Reference

Zone Processor Paging Zone Block

When using a Zone Processor to define a zone, the zone is automatically included in the HAL paging system. Use this block, which is identical to the standalone Paging Zone block, to configure paging parameters for the zone.

Zone Processor Paging Zone Block

To access this block, locate a Zone Processor block on your Processing Map and open its properties. This Paging Zone block, which is a child block of the Zone Processor block, appears. From here, you can open the Paging Zone block properties by double-clicking the block or hovering and clicking the properties icon that appears in the upper right of the block's title bar.

note: The signal path through the block is pre-wired and cannot be changed. The Zone Processor's Level block is placed before the Paging Zone block to prevent a reduction in zone audio volume from rendering pages to the zone inaudible.

For more details, see the Zone Processor Block and About Zone Processing.

See Also